Saw Blades Guide - Flipbook - Page 9
SOLID
SURFACE
15°
0.008"
45°
2° NEG - 0°
M-TC GRIND
SOLID SURFACE
SOLID SURFACE
EXCELLENT
PLEXIGLAS®/VINYL
RADIAL SAW
EXCELLENT
LAMINATE
GOOD
TABLE SAW
SLIDING TABLE
This blade is specifically designed for cutting plastic laminate, Plexiglas®, and solid surface materials such as Avonite®, Dupont Corian®, Wilsonart®,
Gibraltar®, Earthstone® Fountainhead®, Surrell®, Staron® and other acrylic based materials. The triple chip grind is especially configured to leave a swirlfree cut in solid surface materials. The thick, stable plate reduces vibration that degrades the cut and shortens tool life. The blade is suitable for a variety
of saw configurations and its 0° hook angle virtually eliminates self-feeding when it is used with a radial arm saw.
Dia.
10"
Teeth
72
Kerf
MM
Inch
3.2
.126
Plate
MM
Inch
2.2
.087
Hook
Angle
0°
Bore
5/8"
Pin-Hole
—
Tool No.
KSB10-728
WARNING: Not recommended for cutting non-ferrous alloys.
PLASTIC
15°
0.012"
45°
2° NEG
M-TC GRIND
PLASTIC
PLASTIC
EXCELLENT
THIN-WALLED PHENOLIC &
HARD PLASTIC
TABLE SAW
EXCELLENT
LAMINATE
GOOD
SLIDING TABLE
Designed for smooth, chip-free cutting of plastics, these blades have a higher tooth count and will work fantastic in thinner material. They are also
suitable for crosscutting, trimming, and mitering wood and work well for plywood and laminate cutting.
Kerf
Dia.
10"
Teeth
80
MM
2.5
Inch
.098
Plate
MM
Inch
1.8
.071
Hook
Angle
-2°
Bore
5/8"
Pin-Hole
—
Tool No.
KSB10-802
WARNING: Not recommended for cutting non-ferrous alloys.
Call Toll Free 800-645-5555
9
SAW BLADES
