2025 KLINGSPOR BIG Catalog - Catalog - Page 81
FLUTTER SHEETS
VONNEGUT LOADINGS
KLINGSPOR flutter sheets are manufactured
from our flexible cloth-backed premium
LS 309JF ALUMINUM OXIDE material.
4" DIAMETER X 1/4" SHANK
Max RPM
Grit
Price
3,200
3,200
3,200
3,200
3,200
3,200
80 Grit
100 Grit
120 Grit
150 Grit
180 Grit
220 Grit
$17.02
$17.02
$17.02
$17.02
$17.02
$17.02
4" DIAMETER X 1/2" HOLE / NO SHANK
Max RPM
Grit
Price
3,200
3,200
3,200
3,200
3,200
3,200
80 Grit
100 Grit
120 Grit
150 Grit
180 Grit
220 Grit
$6.38
$6.38
$6.38
$6.38
$6.38
$6.38
These loadings will completely fill an 8 head 32
brush unit, or will supply 2 loadings for the 4
head 16 brush unit.
AVAILABLE MATERIAL LS309 (ALUMINUM
OXIDE) OR CS321 (SILICON CARBIDE)
4 SHEETS PER ASSEMBLY
Width x Length
Grit
Price Per Each
4" x 19"
(8 assemblies)
6" x 19"
(8 assemblies)
80+
$274.67
80+
$320.19
Available Grits Include: 80, 100, 120, 150, 180, 220.
Standard Loadings are 1/4" Skip Staggered.
HEAVY DUTY
GRAPHITE ROLLS
Heavy duty graphitecoated canvas will extend
the life of your belts
by reducing heat
and friction. Single
and 2 ply available.
GRAPHITE STICKS
Graphite sticks are used to lubricate belt
backings used in mold sanding.
Graphite Sticks
$20.51 each
CLEANING STICKS
Cleaning Sticks 8" x 2" x 2"
$33.39 each
Loaded wood particles and
resin are easily cleaned
away with this all-natural
stick. No chemicals
needed, simply hold
the stick firmly
against the moving
belt or disc and watch in
amazement. Best if used
right after sanding, before
the abrasive cools down.
Size
F1 felt also available for
platens on wide belt sanders.
Call for information.
Size
Price Per Roll
3" x 10 yard
4" x 10 yard
6" x 10 yard
9" x 10 yard
12" x 10 yard
$92.15
$143.34
$184.30
$276.44
$373.98
2" x 4" x 1/2"
8 End Slits
2" x 6" x 1/2"
4 & 8 End Slits
Grit
Price Per Sheet
320-100
80
320-100
80
Please call for availability of other sizes.
• 50 Sheets Per Box
List Price
FLUTTER ARBOR
1/2" flutter arbor with 1/4" shank
ARBOR1/2X1/4FH.....................$6.09 ea.
Flutter sheet spacers
(1/2" ID x 3/4" OD) 10 pack
FLUTTERSHTSPACR ..............$9.15 ea.
Tips for Flutter Sheet Set Up & Use
• Place two sheets back to back, see Fig. A
• Crisscross sheets to
form a wheel,
see Fig. B and Fig. C.
• Repeat the pattern until
you have 15 to
20 sheets on the arbor,
then tighten the nut to
hold sheets together.
• Secure the assembly
in your drill press,
hand held drill, lathe,
etc. Be sure to tighten
the chuck adequately.
Operate at a maximum speed of 2300
RPM, and we strongly
suggest you DO NOT
exceed this speed.
• Before using the flutter sheets on your project,
break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the
edge so that it doesn’t gouge your work.
GREASE STICK
GREASESTICK26
$23.23 each
Grease Sticks are formulated to
reduce heat while combating loading
on the belt surface. The grease stick
is meant to go on coarse (24-120) grit
belts to increase longevity and the
cutting ability of your belts.
Visit us online: www.klingspor.com
81
$0.58
$0.58
$0.75
$0.86
SANDING/CLEANING
Specialty
SANDING STARS
