Marine Manufacturing - Flipbook - Page 7
Flexible Sanding Pads
ULTRAFLEX SANDING PADS
Our UltraFlex Sanding Pads are the premium foam pads on the market.
These incorporate a dense foam structure and a full, even coating of
either aluminum oxide or silicon carbide grains. This makes for an extremely long-lasting pad that is very flexible for finish-sanding of contoured parts and profiles.
Size (LxW): 4-1/2" x 5-1/2"
* Aluminum Oxide 100 grit only.
Grit sizes: 100*, 120, 180, 220, 320
Box Qty:
10 or 250
FOAM SANDING PADS
The Foam Sanding Pad can be used on severely profiled parts, because it is
more flexible and much thinner. KLINGSPOR Foam Sanding Sponges are
produced with the latest technological advances. These general purpose
foam pads are solvent-free and outperform other similar pads on
the market. Size (LxWxH): 5" x 4" x 1/2"
Grit sizes:
60, 80, 100, 120, 180, 220
Box Qty:
10 or 250
HAND BLOCKS
Ergonomically designed to fit your hand, this hand block uses standard 6"
discs for hand sanding.
Available versions:
Hook & Loop or PSA for use with 6" discs
SANDING BOARDS
This lightweight, rugged board has a cushioned surface. Spring clips
mounted at each end securely hold 2-3/4" x 17-1/2" abrasive sheets. The
KLINGSPOR stiff sanding longboard may be used with PSA sheets.
Sizes: 11", 17"
FUSION FOAM
Abrasive slurry poured onto a foam pad with no substrate
between provides exceptional conformability and consistency
of finish. Can be used wet or dry for finishing applications
where the finest of finishes is required and performance and
longevity is desired.
Discs
Diameters: 3", 5", 6"
Grits:
120-3500
Box Qty:
5
Pads
Size:
Grits:
Box Qty:
3-1/2" x 4-1/2" x 1/2" Size:
120-700
Grits:
5 or 50
Box Qty:
3-1/2" x 4-1/2" x 5mm
120-2500
5
for Dynabrade & sheet sanders
⚠ Please review the back of this book for the California Proposition 65 warnings.
7
