Metalworking - Catalog - Page 57
FLAP DISCS
Works best when routinely lubricated (Item# 95542)
FEATURES
KLINGSPOR PRODUCTS
• For use with Spindle Mounted Sanding Stars
• 4" Sanding Stars
• Flutter Sheets (with Flutter Sheet Arbor)
• 4" and 6" Power Wheels
• 3,200 rpm variable speed
• Air-Flow Control Dynaswivel®
• Rear exhaust
• Replaces tedious hand sanding
ALSO AVAILABLE:
Dyna52052 Dyninger with 1/2” Arbor
Dyna52051 Dyninger with 6mm Collet
Dynastraight® DYNA13204
FEATURES
KLINGSPOR PRODUCTS
• 3,400 rpm
• Ideal set-up for Dynacushion® Wheel
• 5/8"-11 threaded arbor for use with
pneumatic wheels
• Available combo arbor for wheels
up to 3" wide and 5/8" or 1" diameter
center hole
• Great for stainless steel work
• 3 1/2" wide Non-Woven Belts
• SM611 Abrasive Flapwheels (up to
3,800 rpm) or 10" diameter
• VKM 630 Small Finishing Flapwheels
• 8" Sanding Stars
• Flutter Sheets
• 4" and 6" diameter Power Wheels
ALSO AVAILABLE: Model 13205
13071 Combo Arbor for up to 3” wide wheels which have either 5/8” or 1” diameter
center hole. Any Dynacushion® pneumatic wheel with 5/8” bore may also be mounted.
DYNADGS31 - .3 HP
FEATURES:
DYNADGR31 - .3 HP
• .3 hp / 25,000 RPM
• 1/4" collet / rear exhaust
• Gearless, smooth running air motor
FEATURES:
KLINGSPOR PRODUCTS:
• .3 hp / 16,000 RPM
• 1/4" collet / rear exhaust
• Gearless, smooth running air motor
• KM 613’s with 1/4" shank
• Cartridge rolls
• No lap bands
• Carbide Burrs & Mounted Points
• Spindle Brushes
• Unitized wheels
• Wire brushes with 1/4" shank
KLINGSPOR PRODUCTS:
• 1" - 4" QDC’s, QRC’s, & QMC’s
• Mini Flap Discs
• Unitized wheels
• Wire brushes with 1/4" shank
DYNA50219 - .3 HP KIT
FEATURES:
Nitro Tool .3 hp Die Grinder Kit Contains
DGR31 - .3 hp Right Angle Die Grinder (18K RPM)
DGS31 - .3 hp Straight Die Grinder (25K RPM)
DYNADGR51 - .5 HP
KLINGSPOR PRODUCTS:
• 1" - 4" QDC’s, QRC’s, & QMC’s
• Mini Flap Discs
• Unitized wheels
• Wire brushes with 1/4" shank
FEATURES:
• .5 hp / 20,000 RPM
• 1/4" collet / rear exhaust
• Gearless, smooth running air motor
FEATURES:
• .5 hp / 14,000 RPM
• 1/4" collet / rear exhaust
• Gearless, smooth running air motor
DYNADGS51 - .5 HP
DYNA50218 - .5 HP KIT
FEATURES:
Nitro Tool .5 hp Die Grinder Kit Contains
DGR51 - .5 hp Right Angle Die Grinder (14K RPM)
DGS51 -.5 hp Straight Die Grinder (20K RPM)
Visit us online: www.klingspor.com
57
KLINGSPOR PRODUCTS:
• KM 613’s with 1/4" shank
• Cartridge rolls
• No lap bands
• Carbide Burrs & Mounted Points
• Spindle Brushes
• Unitized wheels
• Wire brushes with 1/4" shank
POWER TOOLS
FIBRE DISCS BONDED NON-WOVEN QUICK CHANGE ROLLS BELTS DISCS SHEETS FLAPWHEELS SPECIALTY POWER TOOLS
Lightweight Dyninger DYNA52050
