Woodworking Guide - Flipbook - Page 42
DISCS
BELTS
SHEETS
ROLLS
ROUTER BIT SAWBLADE SPECIALTY NON-WOVEN FLAPWHEELS FOAM PADS
TOOLS
REFERENCE
Keep this Solid Surface Finishing Sequence Chart handy to get the best results with KLINGSPOR Abrasives every time.
FUSION FOAM (AO & SC)
• FOAM ABRASIVE WITH EXTREME
LIFE AND AMAZING FINISH
FP 77 (AO)
PS 73W (AO)
• STEARATED ALUMINUM
OXIDE TO REDUCE LOADING FILM
• T-ACT COATING TO REDUCE
LOADING AND IMPROVE FINISH
MATTE FINISH
OPTIONAL PRE-STEP TO REMOVE SCRATCHES-P150 (PS 33 OR PS 73W)
STEP 1
P240
(PS 33, PS 73W, KLING-NET OR FUSION FOAM)
STEP 2
VERY FINE HAND PAD (WATER IMPROVES FINISH)
OR VERY FINE KLING-ON DISC
To complete the sequences and achieve the best
possible finishes, you’ll need KLINGSPOR’s
Non-Woven Hand Pads. These premium materials are available in a variety of grits to help you
reach the desired surface sheen.
* available in discs for orbital sanding
SEMI-GLOSS FINISH
OPTIONAL PRE-STEP TO REMOVE SCRATCHES-P150
STEP 1
P240
(PS 33, KLING-NET OR FUSION FOAM)
STEP 2
P400
(PS 33, FP 77, KLING-NET OR FUSION FOAM)
STEP 3
P1000
(PS 73W, FP 77, KLING-NET OR FUSION FOAM)
ULTRA FINE HAND PAD (OPTIONAL) OR ULTRA FINE KLING-ON DISC
STEP 4
HIGH GLOSS FINISH
OPTIONAL PRE-STEP TO REMOVE SCRATCHES-P150
STEP 1
P240
(PS 33, KLING-NET OR FUSION FOAM)
STEP 2
P400
(PS 33, FP 77, KLING-NET OR FUSION FOAM)
STEP 3
P1000
(FP 77, KLING-NET OR FUSION FOAM)
STEP 4
P1500
(FP 77, KLING-NET OR FUSION FOAM)
STEP 5
P2000
(FP 77 OR FUSION FOAM 1800-2500)
STEP 6
WHITE / NO ABRASIVE HAND PAD
GEM SANDER - Commonly used in solid
surface finishing. Available thru Klingspor's
Woodworking Shop
SUGGESTIONS FOR BEST RESULTS
1. Use a 10,000-12,000 rpm random orbital sander.
2. Start the sander while resting flat on the surface and remove the sander before
stopping to eliminate swirl marks.
3. Each grit needs to pass over the surface following a "North, South, East, West"
pattern (see illustration) to insure that previous scratches are removed and a
uniform finish is achieved. Two passes per step is recommended.
4. Clean surface after each step to minimize contamination scratches.
Klingspor is one of the country’s largest Dynabrade tool
dealers. You’ll find that these tools will outperform and
outlast any other pneumatic tool on the market. The
most popular and most useful for solid surface finishing
is the Dynabrade model #56815. This random orbital
sander features 12,000 rpms with a 3/16" orbit and a
small hand grip. Dynabrade manufactures many tools
that have perfect applications in solid surface work. Call Klingspor for all of your pneumatic
tool needs
REFERENCE
42
Our aluminum oxide extra-lube stearate materials (PS 73W & FP 77) are the premier products
for the solid surface installer. They will accomplish tasks from removal of scratches to preparation for high gloss finishes. These materials will
prove versatility and premium performance as
you use it. So whether you’re sanding by hand or
with a power sheet sander or disc sander, these
products will be your materials of choice.
Call Toll Free 800-645-5555
