Woodworking Guide - Flipbook - Page 36
DISCS
Router Bits
STANDARD FLUSH TRIM SOLID CARBIDE
ROUTER BIT SAWBLADE SPECIALTY NON-WOVEN FLAPWHEELS FOAM PADS
TOOLS
REFERENCE
PART
NUMBER
Standard Flush Trim bits are an economical solid carbide flush trim that does not use a bearing, but
instead has a smooth portion milled into the solid carbide, which rides along the edge being trimmed
to. They offer extended life and minimal vibration.
PART
NUMBER
CUTTING
LENGTH
SHANK
DIAMETER
OVERALL
LENGTH
PRICE
SC28B
1/4"
1/4"
1-1/2"
$21.95
CUTTING
DIAMETER
2400
2401
2402
CUTTING
LENGTH
OVERALL
LENGTH
BEARING
NUMBER
PRICE
B1
B1
B3
$39.05
$37.16
$39.05
1/4" SHANK
3/8"
3/8"
1/2"
1"
1/2"
1"
2-5/8"
2-1/8"
2-5/8"
TEMPLATE BITS Ball Bearing Guide
ROLLS
SHEETS
BELTS
FLUSH TRIM-TWO FLUTE
Template bits have a top bearing for following a template that is on top of the work.
Carbide tipped. Double flute.
PART
NUMBER
7° BEVEL TRIM SOLID CARBIDE
7° Bevel Trim bits are identical to the standard flush bits, but offer a 7° bevel, which slightly eases
the top edge of laminate to reduce filing.
PART
NUMBER
SC29
CUTTING
LENGTH
1/4"
SHANK
DIAMETER
1/4"
OVERALL
LENGTH
1-1/2"
*
3000
3001
3004
CUTTING
DIAMETER
CUTTING
LENGTH
OVERALL
LENGTH
BEARING
NUMBER
PRICE
B9
B9
B9
$49.68
$51.99
$55.92
1/4" SHANK
1/2"
1/2"
1/2"
1/4"
1/2"
1"
1-7/8"
2"
2-1/2"
* Dado Clean out bits. Use to Square the bottom of dado cuts made on a table saw.
PRICE
$24.27
UP/DOWN CUT SPIRAL BITS
O-FLUTE SPIRAL BITS
Up Cut or Down Cut Solid Carbide
- Slow Spiral Used primarily for routing plastics
O-flute bits (straight or spiral) are ideal for working with plastics, thin aluminum (ACM), other soft
metals, and starboard. The spiral O-flute evacuates shavings much more efficiently than the straight
version. RU2074A has a special High polish grind applied for extra life and performance.
UP CUT
PART #
DOWN CUT CUTTING CUTTING SHANK OVERALL
PART # DIAMETER LENGTH DIAMETER LENGTH PRICE
SINGLE FLUTE
RU1601A
RU1801A
RU2074A
RD2074A
1/8"
3/16"
1/4"
1/2"
5/8"
3/4"
1/4"
1/4"
1/4"
2-1/2"
2-1/2"
2-1/2"
$54.27
$54.27
$51.99
Compression Bits give you the best of both worlds. The part of the spiral bit closest to the tip has a 3/8" upcut and
the part closest to the router is downcut. It compresses the chips to the center of the bit. This is especially good
for plywood, laminates, and MDF when you need the top and bottom edges clean. Choosing the right length of
bit is important to match the thickness of material you are cutting, so both ends of the bit have room to work.
The "M" denotes that the bit has a mortise cut, which provides a 1/4" upcut before the downcut begins. This
allows the cutter to create a shallower groove/dado cut for denser or easily chipped material. "K" refers to our
nano coating technology which increases life and allows for increased feed rates on high production applications.
Up/Down Cut (2+2 Compression) Solid Carbide - Two Flute
PART
CUTTING CUTTING SHANK OVERALL
NUMBER
DIAMETER LENGTH DIAMETER LENGTH
UD2102
1/4"
1"
1/4"
2-1/2"
† UD4122M-K
3/8"
1-1/4"
3/8"
3"
• HC4122M
3/8"
1-1/4"
3/8"
3"
† UD5122M-K
1/2"
1-1/4"
1/2"
3"
LH
RH
PRICE
$78.56
$173.49
$149.71
$233.06
10 mm Shank - Import
DOWEL DRILLS Carbide Tipped & Solid Carbide
Dowel Drills (brad point & V point) are made for production use in line boring, hinge boring, and
dowel drilling machines. They are available in solid carbide, carbide tipped, and in left or right hand
configurations. Available with a "brad point" style tip or a thru hole V-point.
FLUSH TRIM - THREE FLUTE
PART
NUMBER
2500
2501
CUTTING
DIAMETER
1/2"
1/2"
CUTTING
LENGTH
OVERALL
LENGTH
1/4" SHANK
1"
1/2"
ROUTER BITS
2-5/8"
2-1/8"
BRAD POINT (RH + LH)
BEARING
NUMBER
PRICE
B3
B3
$53.15
$49.68
CUTTING
DIAMETER
57MM OAL
PART #
70MM OAL
PART #
MM
5
10 MM Shank - Metric Sizes
DB5-57 (LH) (SC)
DB5-70 (LH) (SC)
PRICE
$26.13
RH and LH rotation. Include LH suffix for left hand rotation.
Supplied with flat on shank. Include SC suffix for optional Solid Carbide as available.
36
Call Toll Free 800-645-5555
