Woodworking Guide - Flipbook - Page 30
DISCS
Sawblades
RIPPING
BELTS
This blade is specifically designed for efficient, smooth ripping. The low tooth count and large gullets
combine to make this blade fast and aggressive. This is suitable for use in table saws or gang-rip saws.
15°
SHEETS
10°
TABLE SAW
12°-20°
ATB GRIND
MODERATE ANGLE
SOFT & HARDWOOD
RIPPING
GANG RIP SAW
RIPPING
ROUTER BIT SAWBLADE SPECIALTY NON-WOVEN FLAPWHEELS FOAM PADS
ROLLS
EXCELLENT
CROSSCUT
WARNING: Not recommended for cutting non-ferrous alloys, plastic, laminate and melamine.
FAIR
Dia.
Teeth
10"
24
Kerf
MM Inch
Plate
MM
Inch
3.2
2.2
.126
GLUE LINE RIPPING
.087
Hook
Angle
Bore
20°
5/8"
Pin-Hole MAX RPM
—
7,600
This special glue line blade shears the wood cleanly
so there is no need to joint the stock prior to gluing.
The precision triple-chip grind & extra-high hook
angle allow aggressive feed rates, yet produce an
extra-smooth cut finish. The thick plate and laser cut
expansion slots minimize vibration. Use on table saws,
sliding table saws, single and gang-rip operations.
Tool No.
Price
KSB10-240
$89.96
15°
0.012"
45°
12°-22°
SOFT & HARDWOOD
RIPPING
TC GRIND
RIPPING
EXCELLENT
CROSSCUT
FAIR
CHIPBOARD
FAIR
TABLE SAW
GANG RIP SAW
PLYWOOD
FAIR
LAMINATE
WARNING: Not recommended for cutting non-ferrous alloys, plastic and melamine.
Dia.
Teeth
10"
32
Kerf
MM Inch
Plate
MM
Inch
3.7
2.5
.145
COMBINATION
.098
Hook
Angle
Bore
12°
5/8"
FAIR
Pin-Hole MAX RPM
—
In many woodworking shops one blade must cut a wide
variety of materials. This blade will effectively rip and
crosscut hardwoods, softwoods, as well as sheet stock
such as plywood and particleboard. It features the timetested combination blade design - four alternate top
bevel teeth with a flat-top raker. This is the best blade
for all-purpose cutting.
7,600
15°
Tool No.
Price
KSB10-301
$124.08
15°
0.014"
15°
COMB 4+1 GRIND
FOUR ATB FOLLOWED BY ONE RAKER, THEN
AN “OPEN” GULLET FOR CHIP CLEARANCE
COMBINATION RIP
& CROSSCUT
CROSSCUT
EXCELLENT
RIPPING
TOOLS
EXCELLENT
CHIPBOARD
GOOD
TABLE SAW
PLYWOOD
SLIDING TABLE
REFERENCE
GOOD
WARNING: Not recommended for cutting non-ferrous alloys.
Dia.
Teeth
10”
50
Kerf
MM Inch
Plate
MM
Inch
3.2
2.2
.126
SAWBLADES
.087
Hook
Angle
Bore
15°
5/8”
30
Pin-Hole MAX RPM
—
7,600
Tool No.
KSB10-500
Price
$113.88
Call Toll Free 800-645-5555
