Router Bits Guide - Flipbook - Page 18
LAMINATE TRIM
TRIM-N-FILE
LAMINATE TRIM BITS
This is the ideal router bit for all plastic laminate work. The "Trim-N-File" router bit does multiple
operations at once. 1) It will trim the laminate overhang flush to the edge with a slight bevel, while 2)
simultaneously creating a slight radius along the top edge. 3) All this is accomplished by following the
heavy duty ball bearing, which slightly protrudes past the cutter to make it all work. By simply adjusting
the depth of cut on the router to best match the laminate thickness, a perfectly flush edge is achieved
and the top edge is smooth. This means that the operator won’t have to come back and file the edge
flush and top rounded like with traditional flush trim bits, so he is saving both time and money.
Two Flute - Ball Bearing Laminate Trim bits are flush trim bits, but designed for
thinner stock like laminates and veneers. They offer a flush, 7°, 15°, and 25° angle. The bevel bits are
ideal for trimming the laminate flush while also easing the top edge for faster filing. Carbide tipped.
Double flute.
PART
NUMBER
BEVEL
DEGREE
2401
2298
2300A
2301
Flush
7°
15°
25°
LARGE
DIAMETER
CUT
LENGTH
BEARING
NUMBER
1/4" SHANK
3/8"
9/16"
5/8"
1"
1/2"
7/16"
1/4"
9/16"
PART
NUMBER
B1
B3
B3
B3
RADIUS
BEVEL
DEGREE
1/16"
1/16"
2°
2°
LARGE
DIAMETER
CUT
LENGTH
BEARING
5/16"
5/16"
B3
B3SQ
1/4" SHANK
2630
* 2631
1-1/16"
1-1/16"
* Square bearing
LAMINATE TRIMMERS
Here’s a Square Deal! A quality KLINGSPOR Trim Bit with the exclusive Euro Square Bearing.
How does it work? The square bearing stops spinning as soon as it touches the workpiece.
Then the side of the square simply slides along the workpiece edge. Compare this to a regular
bearing that rolls along the edge - building up more glue and residue with every revolution.
Plus, the square is made fron non-stick Teflon®, so it wipes clean easily and it won’t mark your
workpiece. If you cut laminates, you need to try this bit.
Square Bearing Laminate Trimmer bits offer a unique solution to the problem of glue
build up during the laminate flush trimming process. Between the square bearing and the
cutter is a wider than normal trough (gap), which allows the excess glue to be evacuated
much easier than a traditional flush trim. Carbide tipped. Double flute.
STANDARD FLUSH TRIM SOLID CARBIDE
Standard
Flush Trim bits are an economical solid carbide flush trim that does not use a bearing, but instead has a
smooth portion milled into the solid carbide, which rides along the edge being trimmed to. They offer
extended life and minimal vibration.
PART
NUMBER
CUTTING
LENGTH
SHANK
DIAMETER
SC28B
1/4"
1/4"
OVERALL
LENGTH
1-1/2"
7° BEVEL TRIM SOLID CARBIDE
PART # 2640
PART # B3SQ
7° Bevel Trim bits are identical to the standard flush bits, but offer a 7° bevel, which slightly eases the
top edge of laminate to reduce filing.
PART
NUMBER
CUTTING
LENGTH
SHANK
DIAMETER
OVERALL
LENGTH
SC29
1/4"
1/4"
1-1/2"
PART # 2660
See our complete line of solid carbide trimmers on pages 8.
PART # B8SQ
PART
NUMBER
CUTTING
DIAMETER
CUTTING
LENGTH
OVERAL
LENGTH
BEARING
NUMBER
1-5/8"
2-1/4"
B3SQ
B8SQ
2-1/4"
B8SQ
1/4" SHANK
2640
2650
1/2"
3/4"
2660
3/4"
1/4"
5/8"
1/2" SHANK
5/8"
These bits are designed with a slight taper on the cutting diameter. This
allows up or down adjustment to achieve an exact blend - even after
resharpening.
ROUTER BITS
18
Call Toll Free 800-645-5555
