2025 KLINGSPOR BIG Catalog - Catalog - Page 176
Keep this Solid Surface Finishing Sequence Chart handy to get the best results with KLINGSPOR Abrasives every time.
FUSION FOAM (AO & SC)
• FOAM ABRASIVE WITH EXTREME
LIFE AND AMAZING FINISH
FP 77 (AO)
PS 73W (AO)
• STEARATED ALUMINUM
OXIDE TO REDUCE LOADING FILM
• T-ACT COATING TO REDUCE
LOADING AND IMPROVE FINISH
MATTE FINISH
OPTIONAL PRE-STEP TO REMOVE SCRATCHES-P150 (PS 33 OR PS 73W)
STEP 1
P240
(PS 33, PS 73W, KLING-NET OR FUSION FOAM)
STEP 2
VERY FINE HAND PAD (WATER IMPROVES FINISH)
OR VERY FINE KLING-ON DISC
To complete the sequences and achieve the
best possible finishes, you’ll need KLINGSPOR’s Non-Woven Hand Pads. These premium materials are available in a variety of grits
to help you reach the desired surface sheen.
* available in discs for orbital sanding
SEMI-GLOSS FINISH
OPTIONAL PRE-STEP TO REMOVE SCRATCHES-P150
STEP 1
P240
(PS 33, KLING-NET OR FUSION FOAM)
STEP 2
P400
(PS 33, FP 77, KLING-NET OR FUSION FOAM)
STEP 3
P1000
(PS 73W, FP 77, KLING-NET OR FUSION FOAM)
STEP 4
ULTRA FINE HAND PAD (OPTIONAL) OR ULTRA FINE KLING-ON DISC
HIGH GLOSS FINISH
OPTIONAL PRE-STEP TO REMOVE SCRATCHES-P150
STEP 1
P240
(PS 33, KLING-NET OR FUSION FOAM)
STEP 2
P400
(PS 33, FP 77, KLING-NET OR FUSION FOAM)
STEP 3
P1000
(FP 77, KLING-NET OR FUSION FOAM)
STEP 4
P1500
(FP 77, KLING-NET OR FUSION FOAM)
STEP 5
P2000
(FP 77 OR FUSION FOAM 1800-2500)
STEP 6
WHITE / NO ABRASIVE HAND PAD
GEM SANDER - Commonly used in solid
surface finishing. Available thru Klingspor's
Woodworking Shop
SUGGESTIONS FOR BEST RESULTS
1. Use a 10,000-12,000 rpm random orbital sander.
2. Start the sander while resting flat on the surface and remove the sander before
stopping to eliminate swirl marks.
3. Each grit needs to pass over the surface following a "North, South, East, West"
pattern (see illustration) to insure that previous scratches are removed and a
uniform finish is achieved. Two passes per step is recommended.
4. Clean surface after each step to minimize contamination scratches.
Klingspor is one of the country’s largest Dynabrade tool
dealers. You’ll find that these tools will outperform and
outlast any other pneumatic tool on the market. The most
popular and most useful for solid surface finishing is the
Dynabrade model #56815. This random orbital sander
features 12,000 rpms with a 3/16" orbit and a small hand
grip. Dynabrade manufactures many tools that have perfect applications in solid surface work. Call Klingspor for
all of your pneumatic tool needs.
Visit us online: www.klingspor.com
175
Our aluminum oxide extra-lube stearate materials (PS 73W & FP 77) are the premier products for the solid surface installer. They will
accomplish tasks from removal of scratches
to preparation for high gloss finishes. These
materials will prove versatility and premium
performance as you use it. So whether you’re
sanding by hand or with a power sheet sander
or disc sander, these products will be your materials of choice.
REFERENCE
Reference - Solid Surface
Solid Surface Finishing
