Router Bits Guide - Flipbook - Page 16
ROMAN OGEE • CHAMFER
A
B
BEAD
1-5/8" MAX
FLUSH
C
DOUBLE ROUND OVER
45˚ CHAMFER
with Adjustable Cutting Length Double Roundover bit is as the name
implies. It is and adjustable bit that creates a rounded edge on the top and bottom of the work at
the same time. The bearing is changeable, to allow the bit to go from a roundover to a beading
application. Carbide tipped. Two-wing cutter.
PART
NUMBER
LARGE
DIAMETER
RADIUS
with Adjustable Cutting Length 45° Chamfer & Edge Bevel bits produce
a 45° angle on the material and are used as a decorative edge or miter joint to produce uniformly crisp
angles. Carbide tipped. Two-wing cutter.
PART
NUMBER
OVERALL
LENGTH
1/8"
3/16"
1/4"
"B"
CUTTING
LENGTH
"C"
CUTTING
HEIGHT
OVERALL
LENGTH
1/4" SHANK
1/2" SHANK
2160
2162
2164
"A"
DEGREE
OF ANGLE
1-1/8"
1-1/4"
1-3/8"
3-3/4"
3-3/4"
3-3/4"
2292
2302
45°
45°
2305
2306
2310
45°
45°
45°
7/16"
5/8"
5/16"
7/16"
1-7/8"
2"
7/16"
3/4"
1-1/16"
2-1/4"
2-1/2"
3"
1/2" SHANK
Assemblies Sold with B5 Bearing for flush round over
Use B20 Bearing for 1/16" Bead • Use B27 Bearing for 1/8" Bead
Replacement Cutter Heads:
Add RH to Part Number for cutter next to shank,
Add LH to Part Number for end cutter.
Example: 2160LH
5/8"
1-1/16"
1-1/2"
Bearing Number: B3 (Use B2 on #2292)
* 2292 has 1" large diameter for use in trim routers.
25° BEVEL
EDGE BEVEL
Edge Bevel bits are similar to the chamfer bits, but produce 60°, 30°, 25°, 22-1/2°, 15°, or 7° angles
on the material and are used as a decorative edge or miter joint to produce uniformly crisp angles.
Carbide tipped. Two-wing cutter.
PART
NUMBER
ROMAN OGEE
RADIUS
LARGE
DIAMETER
CUTTING
LENGTH
OVERALL
LENGTH
9/16"
11/16"
2"
2-1/4"
9/16"
11/16"
1"
2-1/4"
2-3/8"
2-3/4"
* 2298
2300
* 2300A
2301
1 2308
7°
15°
15°
25°
30°
1/4" SHANK
2200
2201
5/32"
1/4"
2202
2203
2210
5/32"
1/4"
3/8"
1-1/8"
1-1/2"
2
1
OVERALL
LENGTH
3/8"
1/2"
1/4"
9/16"
7/8"
1/2"
1/2"
1/4"
1/2"
3/4"
2-1/8"
2"
2"
2"
2-3/4"
2325
2307
2309
2318
15°
22 1/2°
30°
60°
1"
15/16"
7/8"
9/16"
15/16"
7/8"
3/4"
1/2"
2-3/4"
2-3/4"
2-3/4"
2-1/2"
Bearing Number: B3
* Used on Laminate Trim
1 Used for six sided boxes
2 Used for eight sided boxes
3 Used for twelve sided boxes
Bearing Number: B3
PART # 2200/2202
"C"
CUTTING
HEIGHT
1/2" SHANK
3
1/2" SHANK
1-1/8"
1-1/2"
2"
"B"
CUTTING
LENGTH
1/4" SHANK
Roman Ogee bits has a convex curve at the bearing and a concave curve at the top. It is a decorative
profile that jazzes up any wood edge. Carbide tipped. Two-wing cutter.
PART
NUMBER
"A"
DEGREE
OF ANGLE
PART # 2201/2203
ROUTER BITS
PART # 2210
15° BEVEL
16
22 1/2° BEVEL
30° BEVEL
Call Toll Free 800-645-5555
