2025 KLINGSPOR BIG Catalog - Catalog - Page 140
SOLID WOOD:
RIP:
KSB10-240 – More aggressive, faster & leaves a rougher cut
KSB10-301 – Less aggressive and better edge finish
KSB10-240TKT – Thin Kerf
Crosscut: KSB10-800 / KSB12-960 (For use on a table saw)
KSB10-500
KSB10-806 / KSB12-106 (For use on Miter saws, sliding miter saws & Radial Arm)
Combo
(Rip & crosscut wood, plywood, chipboard):
KSB10-500 Better overall results on solid wood
KSB10-400 More aggressive and faster for rough cutting in wood
KSB10-504TKT – Thin Kerf
PLYWOOD:
KSB10-601 (Single-sided only – may chip on the back side)
KSB10-801 (same blade, but with more teeth – 80 vs 60)
KSB12-721 & 721-30 (Single-sided only – may chip the back side)
KSB10-800 (Different tooth configuration – ATB – and better for double-sided & prefinished plywood applications).
Also good for crosscutting solid wood.
LAMINATE (single sided):
KSB10-728 Solid surface blade
KSB10-802 Plastic blade
KSB10-803 / KSB12-963 Melamine blade
MITER CUTS:
KSB10-806 10" Miter Blade
KSB12-106 12" Miter Blade
KSB10-816TKT 12" Thin Kerf Miter
KSB10-606TKT 10" Thin Kerf Sliding Miter
KSB12-726TKT 12" Thin Kerf Sliding Miter
MDF/Chipboard:
KSB10-801 Plywood/Laminate
KSB10-803 / KSB12-963 Melamine blade
MELAMINE:
KSB10-803 / KS12-963
PLASTIC:
KSB10-802 (Phenolic & hard plastics)
KSB10-728 (Plexiglass)
KSB10-805 / KSB12-105 (Phenolic, Hard plastics & aluminum)
NON-FERROUS (Brass, copper, aluminum, etc.):
KSB10-805 / KSB12-105 (Thin wall – less than 1/4")
KSB10-605 (Thick wall - greater than 1/4")
KLINGSPOR GUARANTEE & WARRANTY: KLINGSPOR warrants to the original purchaser at retail that each new saw blade shall
be free from defects in material and workmanship. Upon verification of failure or malfunction, KLINGSPOR shall, at its option, within forty five
(45) days of purchase, replace the saw blade, subject to the Guidelines below. • In the event of failure or malfunction, return the product, properly
packaged and postage prepaid, to KLINGSPOR. Please call KLINGSPOR at 800 645-5555. • KLINGSPOR assumes no liability for defects or
damage caused by abuse or misuse of any product or unauthorized service of any product. The product must have been used for its recommended
purpose and not modified by sharpening or other changes. Normal wear and tear is not covered under KLINGSPOR warranties.
Visit us online: www.klingspor.com
139
SAW BLADES
Saw Blades
SAW BLADES
SAW BLADE APPLICATION GUIDE
