2025 KLINGSPOR BIG Catalog - Catalog - Page 135
Saw Blades
SAW BLADES
PLYWOOD / LAMINATE
CUTOFF
15°
0.012"
45°
10°-12°
TC GRIND
FOLLOWED BY FLAT RAKER
PLASTIC LAMINATE
SINGLE SIDED
PLYWOOD
LAMINATE (Single Sided)
EXCELLENT
MDF
EXCELLENT
CHIPBOARD
EXCELLENT
PLYWOOD
GOOD
CROSSCUT
FAIR
SLIDING TABLE
These blades are specifically designed for clean cuts in single-sided plywood laminates. The greater number of teeth, triple-chip grind
and 10°-12° hook angle provide an excellent balance between feed resistance and finish. This leaves a clean finish on the top side of the
plywood or plastic laminate materials. Some table saws require special scoring blades (KSB120-T14 see below) in conjunction with the
KSB12-721-30 below to accomplish clean cuts on double sided laminates.
Dia.
10"
10"
12"
300mm
Teeth
60
80
72
72
MM
3.2
3.2
3.2
3.2
Kerf
Inch
.126
.126
.126
.126
MM
2.2
2.2
2.2
2.2
Plate
Inch
.087
.087
.087
.087
Hook
Angle
12°
10°
12°
10°
Bore
5/8"
5/8"
1"
30mm
Pin-Hole
—
—
—
Tool No.
KSB10-601
KSB10-801
KSB12-721
KSB12-721-30
Price
$121.60
$151.55
$164.08
$164.08
30mm bore accepts pin-hole arrangements of: 2/10/60, 2/7/42 & 2/9/46.
WARNING: Not recommended for cutting non-ferrous alloys and melamine.
ADJUSTABLE SCORING SETS
5°
15°
12°
ATB GRIND
MODERATE ANGLE
SCORING PARTICLE
BOARD & DOUBLE
SIDED MDF LAMINATE
DOUBLE-SIDED MELAMINE
EXCELLENT
PLASTIC LAMINATE
EXCELLENT
Used on panel saws and sliding table saws (ex. SCM, & Altendorf), with
separate scoring units for chip-free cuts on both sides of the material.
Adjustable scoring sets consist of two 12-tooth saw blades with shims to
adjust the kerf width (2.8mm to 3.6mm). These are used in combination
with our plywood/ laminate series Triple chip blade above.
SLIDING TABLE
PANEL SAW
Dia.
120mm
Teeth
12x2
Kerf
MM
Inch
2.8-3.6 .110-.144
Plate
MM
Inch
2.2(x2) .087(x2)
Hook
Angle
12°
Bore
22mm
Pin-Hole
—
Tool No.
KSB120-T14
Price
$193.06
WARNING: Not recommended for cutting non-ferrous alloys.
SAW BLADES
134
Call Toll Free 800-645-5555
