2025 KLINGSPOR BIG Catalog - Catalog - Page 117
Router Bits
GLUE JOINTS
ONE TOOL MAKES BOTH CUTS
Locking Drawer Glue Joint bits (3346, 3347, 3350, &3352) are the perfect
tool for making drawers from wood. One bit does it all. After the proper
height is set, it is just a matter of running the drawer front with the outside
face up, flat on the table. The side pieces are machined vertically, their
inside faces against the fence and cutter. Carbide tipped, two-wing cutter.
LOCKING DRAWER GLUE JOINTS
45° LOCK MITER
45° Lock Miter bits deliver double the glue surface of a traditional 45° miter.
It creates both the miter and a joint lock at the same time, which prevents
movement when clamping pressure is applied. Board "A" is ran horizontally,
while board "B" is ran vertically. Carbide tipped, two-wing cutter.
DRAWER FRONT
ONE TOOL MAKES BOTH CUTS
Part
Number
Large
Diameter
Cutting
Length
Shank
Diameter
Overall
Length
3360
3362
1/2" - 1-1/4"
1/2"- 3/4"
3-1/8"
2"
1/2"
1/2"
2-7/8"
2-3/8"
Price
$290.10
$214.01
Note: 3362 is recommended for stock thickness 1/2 - 3/4"
Part
Number
Large
Diameter
Cutting
Length
Shank
Diameter
Overall
Length
Price
3346
3347
3/4"
1"
1/2"
1/2"
1/4"
1/2"
1-7/8"
2-1/8"
$80.85
$85.60
LOCKING DRAWER GLUE JOINTS
WEDGE TONGUE
& GROOVE
Wedge Tongue & Groove bits are the ideal bits for joining two boards together where strength and alignment are important. This set is for joints that are
glued along the length. The wedge shape of the tongue increases the glue
surface - adding to the strength of the joint. This set should only be used in a
router table. Carbide tipped, two-wing cutter.
ONE TOOL MAKES BOTH CUTS
Part
Number
Large
Diameter
Cutting
Length
3370
5/8" - 1-1/4"
1-1/4"
3352
Overall
Length
Price
2-7/8"
$285.33
1/2" SHANK
DRAWER FRONT
Part
Number
Shank
Diameter
Large
Diameter
Cutting
Length
Shank
Diameter
Overall
Length
1"
1"
1/2"
2-3/8"
Price
1-1/4"
* Order 3370 for Two Piece Set.
* Order 3370A or 3370B for individual cutters.
$126.31
3373A
3373B
STRAIGHT TONGUE
& GROOVE
ONE TOOL MAKES BOTH CUTS
STANDARD GLUE JOINT
Standard Glue Joint bit provides lots of glue surface to join boards together.
One cutter makes both cuts, so no need to make two set-ups. Board "A"
runs face down and board "B" face up. A test piece may be required to fine
tune the set up. Carbide tipped two wing cutter.
Part
Number
3354
Large
Diameter
1/2" - 1-1/4"
Cutting
Length
Shank
Diameter
1-1/2"
ROUTER BITS
1/2"
Overall
Length
2-3/4"
Ball Bearing Guide
Straight Tongue & Groove bits are the ideal bits for joining two boards together where strength and alignment are important. This set makes the Tongue
and Groove joint in its simplest form. Both sides of the joint are straight and
square. Each side is formed with its own bit. This set works best when used
in a router table with the fence in line with the bearing.
Carbide tipped, two-wing cutter.
Part
Number
Large
Diameter
Cutting
Length
3373
1/2" - 1-1/4"
1-1/4"
Overall
Length
Price
3-1/8"
$285.33
1/2" SHANK
Price
$147.42
Shank
Diameter
1-1/4"
* Order 3373 for two piece set
* Order 3373A or 3373B for individual cutters.
Bearing Number: B7
116
Call Toll Free 800-645-5555
