2025 KLINGSPOR BIG Catalog - Catalog - Page 111
Router Bits
LAMINATE TRIM
LAMINATE TRIM BITS
Two Flute - Ball Bearing Laminate Trim bits are flush trim bits, but
designed for thinner stock like laminates and veneers. They offer a flush, 7°,
15°, and 25° angle. The bevel bits are ideal for trimming the laminate flush
while also easing the top edge for faster filing. Carbide tipped. Double flute.
Part
Number
Bevel
Degree
Large
Diameter
Cut
Length
Bearing
Number
Price
1/4" SHANK
2401
2298
2300A
2301
Flush
7°
15°
25°
3/8"
9/16"
5/8"
1"
1/2"
7/16"
1/4"
9/16"
B1
B3
B3
B3
$38.24
$46.37
$43.99
$50.41
This is the ideal router bit for all plastic laminate work. The "Trim-N-File" router
bit does multiple operations at once. 1) It will trim the laminate overhang flush
to the edge with a slight bevel, while 2) simultaneously creating a slight radius
along the top edge. 3) All this is accomplished by following the heavy duty ball
bearing, which slightly protrudes past the cutter to make it all work. By simply
adjusting the depth of cut on the router to best match the laminate thickness, a
perfectly flush edge is achieved and the top edge is smooth. This means that
the operator won’t have to come back and file the edge flush and top rounded
like with traditional flush trim bits, so he is saving both time and money.
Part
Number
Radius
Bevel
Degree
2630
* 2631
1/16"
1/16"
2°
2°
Large
Diameter
Cut
Length
Bearing
Price
B3
B3SQ
$52.55
$60.02
1/4" SHANK
1-1/16"
1-1/16"
5/16"
5/16"
* Square bearing
LAMINATE TRIMMERS
STANDARD FLUSH TRIM SOLID CARBIDE
Standard Flush Trim bits are an economical solid carbide flush trim that does
not use a bearing, but instead has a smooth portion milled into the solid
carbide, which rides along the edge being trimmed to. They offer extended
life and minimal vibration.
Part
Number
Cutting
Length
Shank
Diameter
Overall
Length
Price
SC28B
1/4"
1/4"
1-1/2"
$22.59
Here’s a Square Deal! A quality KLINGSPOR Trim Bit with the exclusive Euro
Square Bearing. How does it work? The square bearing stops spinning as
soon as it touches the workpiece. Then the side of the square simply slides
along the workpiece edge. Compare this to a regular bearing that rolls along
the edge - building up more glue and residue with every revolution. Plus, the
square is made fron non-stick Teflon®, so it wipes clean easily and it won’t
mark your workpiece. If you cut laminates, you need to try this bit.
Square Bearing Laminate Trimmer bits offer a unique solution to the problem
of glue build up during the laminate flush trimming process. Between the
square bearing and the cutter is a wider than normal trough (gap), which
allows the excess glue to be evacuated much easier than a traditional flush
trim. Carbide tipped. Double flute.
PART # 2640
PART # B3SQ
7° BEVEL TRIM SOLID CARBIDE
7° Bevel Trim bits are identical to the standard flush bits, but offer a 7° bevel,
which slightly eases the top edge of laminate to reduce filing.
Part
Number
Cutting
Length
Shank
Diameter
Overall
Length
Price
SC29
1/4"
1/4"
1-1/2"
$24.97
PART # 2660
PART # B8SQ
Part
Number
Cutting
Diameter
2640
2650
1/2"
3/4"
2660
3/4"
Cutting
Length
Overal
Length
Bearing
Number
Price
B3SQ
B8SQ
$53.49
$71.09
B8SQ
$71.09
1/4" SHANK
1/4"
5/8"
1-5/8"
2-1/4"
1/2" SHANK
5/8"
2-1/4"
These bits are designed with a slight taper on the cutting diameter. This
allows up or down adjustment to achieve an exact blend - even after
resharpening.
ROUTER BITS
110
Call Toll Free 800-645-5555
